March Pumps and Parts are
Stocked and Distributed by: |
|---|
March Pumps and Parts are
Stocked and Distributed by: |
|---|
Leak Proof, Sealless Magnetic Drive Chemical Pumps |
|
BUILT-IN OVERLOAD
PROTECTION
Built to stand up under heavy loads, March pumps are
equipped with built-in overload protection. Under adverse
conditions, the magnetic drive acts as a clutch to eliminate
overloading and motor burnouts.
| Common Model
Designations: AC=Air Cooled LC= Liquid Cooled BC=Blast Cooled DP=Drip Proof TE=Totally Enclosed AM=Air Motor |
Broad range of
construction materials available for corrosive
applications Typical Materials of Construction*: 'R'= Polypropylene 'K'= KynarŪ 'S'= Stainless Steel 'H'= Hastelloy CŪ *Other materials available upon special order! |
| March Pump Color Designations: Blue: Pump must be run fully submerged Maroon: Pump can be run in open-air or fully submerged |
Dual Head models are
available for use in applications where Self-Priming Models are available: |
Series 1 & 893
Commonly used in photographic equipment,
refrigeration systems, and ornamental displays
Available in Open Air or Submersible design
Flows to 3 GPM, Heads to 10.6'
Series MDX
Used in aquariums, bio-medical applications, vending
machines, etc.
Flows to 8.6 GPM, Heads to 26'
Series 2
Flows to 6.2 GPM, Heads to 32'
Series 3
Flows to 10.5 GPM, Heads to 39'
Series 4
Flows to 16 GPM, Heads to 49'
Series 5
Flows to 18 GPM, Heads to 50'
Series 5.5
Flows to 30 GPM, Heads to 41'
Series 6
Flows to 38 GPM, Heads to 46'
Series 7
Flows to 53 GPM, Heads to 60'
Series 7.5
All molded parts are natural KynarŪ
(PVDF), ideal where even
slightest trace of foreign matter can cause a problem
Flows to 82 GPM, Heads to 85'
Series 8
Flows to 125 GPM, Heads to 95'
Series 10
Flows to 210 GPM, Heads to 170'
Logos on this page are
copyrights of their respective companies.
The sunair logo is a registered
trademark of the Sunair Co.
