Click Here for Info on the All New an Innovative Hybrid Design combining the benefits of Mag-Drive and Canned Motor Pumps!	HMD Kontro Magnetic Drive (Sealless) ANSI Process Pumps

Models include:

GT For general transfer duties with capacities up to 25m3/hr and heads up to 41m (at 50Hz). The GT has been specifically designed as a compact, cost-effective and minimum maintenance pump.

GS The GS is a versatile range of general service pumps designed to cover a wide duty and application base using the minimum of pump models by maximising interchangeability of components. Available within the range is the GSA (ANSI standard pump) and the GSI (ISO standard pump).

AL The AL range is a series of fluoro-plastic lined pumps, designed to handle corrosive chemicals, particularly organic chemicals, inorganic acids, alkalis and salts. Available within the range is the ALA (ANSI standard pump) and the ALI (ISO standard pump).

CS A range of magnet drive pumps particularly suited to pumping thermal oils, and other hot mediums utilising HMD’s torque ring design - solving traditional mechanical seal problems on high temperature applications.

GSP The GSP comprises a range of pumps based on the GS drive, built to API 610 specification, suitable for heavy duty applications. The pump operates within a temperature range of -40°C to +350°C and system pressures up to 350 bar.

SP A range of self priming pumps primarily designed for tank/tanker off-loading duties. With the elimination of the ingress of air into the suction line, a faster priming operation is ensured.

HP A range of high pressure pumps capable of system pressures up to 350 bar. Available in close coupled or separate mounted configurations.

GSL A range of seal-less magnet drive pumps have been designed for pumping liquids for the low temperature heat transfer process. With a temperature range from -100°C to +150°C this model range is available in 316 Stainless Steel for constant low temperature applications.

GSS High head flow multistage design: up to 8 stages, 5 liquid ends, 12 magnet coupling sizes. Temperature range -40°C to +120°C. 40 bar pressure rating. Flange options available.

For more information go to the HMD home page, or Sundyne's Kontro Section.

Logos on this page are copyrights of their respective companies.
The sunair logo is a registered trademark of the Sunair Co.

BACK HOME